Loading...
TC Res. No. 2009-42 APPROVING A PIPELINE CROSSING AGREEMENTTOWN OF AVON RESOLUTION NO. 09-42 Series of 2009 A RESOLUTION APPROVING A PIPELINE CROSSING AGREEMENT WITH UNION PACIFIC RAILROAD AT MILE POST 308.51, TENNESSEE PASS SUBDIVISION, FOR CONSTRUCTION OF THE COMMUNITY HEAT RECOVERY PROJECT WHEREAS, the Town of Avon has appropriated funds in its Capital Improvements Program for construction of a Community Heat Recovery Project utilizing heat from the Avon Wastewater Treatment Facility (WWTF) process effluent; and WHEREAS, the Town of Avon is in partnership with the State of Colorado Governor's Energy Office (GEO) and the Eagle River Water and Sanitation District (ERWSD) for construction of the project; and WHEREAS, the project will provide public benefit to the community by providing a renewable source of heat energy for the Avon Recreation Center, thereby implementing goals of reducing energy consumption in Avon; and WHEREAS, the Town will construct a pipeline in order to convey the heat energy from the WWTF to the Recreation Center, which pipeline must cross the Union Pacific Railroad (UPRR) Right of Way at Milepost 308.51, Tennessee Pass Subdivision, and must be installed beneath the existing railroad tracks; and WHEREAS, the Pipeline Crossing Agreement with UPRR, attached as Exhibit A to this Resolution, pen-nits the Town to construct, operate, and maintain the pipeline utility across the i)PRR Right of Way; NOW, THEREFORE BE IT RESOLVED BY THE TOWN COUNCIL OF THE TOWN OF AVON, COLORADO, that the Pipeline Crossing Agreement as hereto attached as Exhibit A is hereby approved by the Town of Avon. ADOPTED on December 8, 2009. ATTEST: ST: �jc Pa envy. Tow erk TO OUNCIL- Ronald C. Wolfe, Mayo I.ATown Clerk \Council \Resolutions \2009 \Resolution No. 09 -42 UPRR Pipeline Crossing Easement rev ejh.doc Pipeline Crossing 080808 Form Approved, AVP -Law PIPELINE CROSSING AGREEMENT Mile Post: 308.5 1, Tennessee Pass Subdivision/Branch Location: Avon, Eagle County, Colorado Folder No. 02584 -73 THIS AGREEMENT ("Agreement") is made and entered into as of November 04, 2009, ( "Effective Date ") by and between UNION PACIFIC RAILROAD COMPANY a Delaware corporation, ( "Licensor ") and TOWN OF AVON, a Colorado municipal corporation to be addressed at Po Box 975, Avon, Colorado 81620 ("Licensee"), IT IS MUTUALLY AGREED BY AND BETWEEN THE PARTIES HERETO AS FOLLOWS: Article 1. LICENSOR GRANTS RIGHT. In consideration of the license fee to be paid by the Licensee and in further consideration of the covenants and agreements herein contained to be by the Licensee kept, observed and performed, the Licensor hereby grants to the Licensee the right to construct and thereafter, during the term hereof, to maintain and operate two 10 inch pipeline for transporting and conveying water only and one electrical and one data pipeline across Licensor's track(s) and property (the "Pipeline ") in the location shown and in conformity with the dimensions and specifications indicated on the print dated November 03, 2009 and marked Exhibit A, attached hereto and hereby made a part hereof. Under no circumstances shall Licensee modify the use of the Pipeline for a purpose other than transporting and conveying water, electrical and date, and the Pipeline shall not be used to convey any other substance, any fiber optic cable, or for any other use, whether such use is currently technologically possible, or whether such use may come into existence during the life of this Agreement. Article 2. LICENSE FEE. Upon execution of this Agreement, the Licensee shall pay to the Licensor a one -time License Fee of Nine Thousand Eight Hundred Twenty Dollars ($9,820.00). Article 3. OPEN CUT. A. Administrative Handling Charge. Upon the execution and delivery of this Agreement, the Licensee shall pay to the Licensor a fee of Three Thousand DOLLARS ($3,000.00) for the convenience of utilizing 'open cut' method of construction and for the impact or disruption this method of construction causes the Licensor in scheduling work crews to accommodate the construction. B. Licensee to Bear All Expenses Relating to Licensor Temporarily Removing Trackage; Licensee to be Liable for Delay; Estimated Costs. (l) The Licensee will utilize the `open cut' method of constructing and/or installing the Pipeline on the Premises, which will require the Licensor, at Licensee's sole expense, to temporarily remove and take out of service that portion of trackage designated on Exhibit A and relay such trackage upon completion of Licensee's work. C. Deferred Construction. The Licensor and Licensee acknowledge that conditions inherent in the 'open cut' method of constructing and/or installing the Pipeline may cause the complete stabilization of Licensor's trackage supported by new cuts or fills to he deferred beyond the construction period, and that Licensoe's operation over the roadbed during the seasoning period will impose extraordinary maintenance costs in the event of caving, sliding, slipping, sinking or settling, including damage to rip - rapping or protective work in connection therewith, as well as settlement and consolidation of tracks and ballast, until the seasoning period is complete. Therefore, the Licensee will pay to the Licensor, as a part of the consideration for this Agreement, all that part of the cost and expense of extraordinary maintenance (hereinafter referred to as 'Deferred Construction') associated with the Facility which can be attributed to failure of subgrade, settlement, and consolidation of subballast, or roadbed, or any combination thereof, which are incurred during the period commencing immediately following completion of the work on the Facility by the Licensee or its contractor and ending five years thereafter. The Deferred Construction costs aforesaid shall include reimbursement of the extra cost, in excess of normal maintenance costs, of maintaining embankments and that portion of said tracks above subgrade in accordance with acceptable maintenance standards, and will include cost of maintaining proper alignment, proper surface and use of ballast and other necessary materials. Article 4. CONSTRUCTION MAINTENANCE AND OPERATION. The grant of right herein made to the Licensee is subject to each and all of the terms, provisions, conditions, limitations and covenants set forth herein and in Exhibit B, attached hereto and hereby made a part hereof. Article 5. DEFINITION OF LICENSEE For purposes of this Agreement, all references in this Agreement to the Licensee shall include the Licensee's contractors, subcontractors, officers, agents and employees, and others acting under its or their authority. If a contractor is hired by the Licensee for any work performed on the Pipeline (including initial construction and subsequent relocation or maintenance and repair work), then the Licensee shall provide a copy of this Agreement to its contractor and require its contractor to comply with all the terms and provisions hereof relating to the work to be performed. Any contractor or subcontractor shall be deemed an agent of Licensee for the purpose of this Agreement, and Licensee shall require such contractor or subcontractor to release, defend and indemnify Licensor to the same extent and under the same terms and conditions as Licensee is required to release, defend and indemnify Licensor herein. Article 6. INSURANCE. A. Before commencement of the term of this Agreement and prior to any Pipeline construction, the Licensee or Licensee's contractor shall obtain the required Railroad Protective Liability insurance at its sole expense, as specified in Section E on Exhibit C attached hereto and hereby made a part hereof. The Licensee, at its sole expense, shall also provide to the Licensor the other insurance binders, certificates and endorsements described in Exhibit C, and also require that its contractor or subcontractor maintain the insurance coverages as set forth in Exhibit C, naming Licensor as and additional insured. B. Not more frequently than once every two years, Licensor may reasonably modify the required insurance coverage to reflect then - current risk management practices in the railroad industry and underwriting practices in the insurance industry, C. All insurance correspondence, binders, certificates and endorsements shall be directed to: Union Pacific Railroad Company Real Estate Department – Folder No. 02584 -73 1400 Douglas Street STOP 1690 Omaha, NE 68179-1690 D. Failure to provide evidence as required by this section shall entitle, but not require, Licensor to terminate this License immediately. Acceptance of a certificate that does not comply with this Article shall not operate as a waiver of Licensee's obligations hereunder. E. if the Licensee is a public entity subject to any applicable statutory tort laws, the limits of insurance described in Exhibit C shall be the limits the Licensee then has in effect or which is requited by applicable current or subsequent law, whichever is greater, a portion of which may be self - insured with the consent and approval of Licensor. F. The fact that insurance (including without limitation, self - insurance) is obtained by Licensee or its contractor /subcontractor shall not be deemed to release or diminish the liability of Licensee including, without limitation, liability under the indemnity provisions of this License. Damages recoverable by Licensor shall not be limited by the amount of the required insurance coverage. Article 7, TERM. This Agreement shall take effect as of the Effective Date first herein written and shall continue in full force and effect until terminated as herein provided. Article 8. SPECIAL PROVISIONS The Licensee must get approval from the Manager of Track Maintenance for the open cut method of installation. The Manager of Track has total discretion on the method of installation.. IN WITNESS WHEREOF, the parties hereto have caused this Agreement to be executed as of the date first herein written. UNION PACIFIC RAILROAD COMPANY TOWN J By: By: sS Dir to( -Contracts p Name Printed: 1�c�c tol Title: - 1A/l .1" Ylr___� —� PLACE ARROW INDICATING NORTH DIRECTION RELATIVE TO CROSSING UP z�QQ NO SCALE 5 � F T. ENCASED N ®N °FLAMMABLE .uprr.com ]PIPELINE CROSSING n r Iz- z1z' ; 5621 T. �( FT, �. ISFT, - -- SEAL CASING 1L FT. _.. eI,— CASING PIPE ( ') 20 3 IT. ( 1 &Aj B riJ - t I ) FT. GROIlHp STEEL CASING WALL "URV ACE THICKNESS CHART SU8GR4DE MINIMUM DIAMETER OF iHICKNf55 CAS[NG PIPE .2500' lT4' IZ' OR 1E55 .3125" Si16" OVER 12 " -i6" .3750" 3�8' OVER t8 " ,500 ITt6' OVER 22-28" FT, .5000" LJ 2" SEAL GAStNG OVER 28 " -34" .5625" 9 15" OVER 34 - -42- J .625 OVER 42 " -48' OVER 48" MUST BE �PROV W. i NOTE: THIS CHART IS ONLY FOR NC AYSiIELO MWI0TH PIPES MITNIMLUM STRENGTH OF 35,000 PSI. 1:U, VT 7 FORMULA TO FIGURE CASINC �FT. _ __ LENGTH WITH ANGLE OF i10 F T. - CROSSING OTHER THAN 9CT° TT ALL HORIZONTAL 0157ANCE5 TO BE MEASURED AT RIGHT ANGLES FROIA Q OF TRACK. 7l CASING TO EXTEND BEYOND THE 9t OF TRACK AT RIGHT ANGLES THE GREATER OF 20 20 FT., OR 30 FT_ AND BEY ONO LIMIT OF RAILROAD RIGHT -OF -WAY i IF NECESSARY 10 PROVIDE PROPER LENGTH OUTSIDE OF TRACK. 31 MINT mum OF 50' Fq. THE END 0: ANY RAILROAD BRIDGE, 4 OF ANY CULVERT, OR FROM ANY SWITCHING AREA. Al SIGNAL REPRESENTATIVE MUST BE PRESENT DURING INSTALLATION IF RAILROAD SIGNALS ARE IN THE VICINITY OF 51 ALLOWABLE FIXED OBJECTS INCLUDE: BACKNALLS OF BRIDGE S; R OF ROAD CROSSINGS 8 Ov EP.HEAp CROSSING. TPACh 1NOIE 2) VI ADLI[7S (CivE 6! CASING AND CARRIER PIPE MUST RE PLACED 4 uI NI MUM OF 2 FEET BELOW THE EXISTING FIBER OPTIC CABLE, ANY 5 FEET OF TN£ Ez ]STING FIBER OPTIC CABLE MUST ROAD NAME t, OR CUL VEAi S. EXCAVAT(DN REOLIREO WITHIN L eE HANO DUG. A) IS PIPELINE CROSSING WITHIN DEDICATED STREET ? YES; NO; B) IF DES, NAME CF STREET EXHIBIT "A" _ _ D) 0[SiR]BUTION LINE _ C TRANSMISSION LINE CI CARRIER PIPE COMMODITY TO BE CONVEYEDW�F2 �1_�j- ����¢U �r�� UNION PAC[FiC RAILROAD (, C] OPERATING PRES R P51 2 -l0 "' TlwMtit�t P..ci WALL THICKNESS ;DIAMETER 2 -!1 ;MATERIAL - E) CAS1N; P1PE ! I h{OpF.� fi WALL THICKNESS G`f,z; "r� m= P 3OltA1 f �,��,�- ;DIAMETER ;MATERIAL STY; NOTE :CASING MUST HAVE 2" CLEARANCE BETWEEN GREATEST ENCASED a�•�� OUTSIDE DIAMETER OF CARRIER PIPE AND CPOSS NO AT INTERIOR DIAMETER OF CASING PIPE. WHEN FURNISHING DIMENSIONS, GIVE OUTSIDE OF A vo VA � CARRIER PIPE AND INSIDE OF CASING PIPE, F METHOD OF INSTALLING CASING PIPE UNDER TRACK(S): DRY BORE AND JACK ( WET BORE `�' •T �� ~_ NOT PERMITTED) ; TUNNEL ; OTHER_ 0F'G7Aj CAS /1� 170ss14gf G) WILL CONSTRJCTION BE BY AN OUTSIDE RR - FILE N(� )%7`04 CONTRACTOR ?_YES; No; H) DISTANCE FROM CENTER LINE OF TRACK TO NEAR FACE OF B D JACKING °�- �� -�"� — GATE PITS WHEN MEASURED AT RIGHT ANGLES TO TRACK W A R N I N G 1 4PPL1 rANT HAS C6NTACTED" _I-� 00- 336 -9f93, ( ) U. P. COMMUNICAT i(CN DEPAy MENT, IN ALL occ +sl TN4, a. o Gq.VJN(cAT roNs DEPARTMENT AND HAS DETFPMJ] JED FIBER GP?I( CA[jLC_ DGES W-6 BE COA(TAf TED iN ADVAN <E OF ANY Wry. if' ; DOES NOT ; EXIST ST IN V[CIN ?TY OF WORK TO BE PERFORMED . TICKET NO, _ DETERMINE FAISI ENCE AND xATSw of FieeR oPnc cAB E. FnfN+E 1- 800 - Jab -9i9J Pipeline Crossing 07/201+78 Form Approved, AVP Law EXHIBIT B Section 1. LIMITATION AND SUBORDINATION OF RIGHTS GRANTED. A. The foregoing grant of right is subject and subordinate to the prior and continuing right and obligation of the Licensor to use and maintain its entire property including the right and power of the Licensor to construct, maintain, repair, renew, use, operate, change, modify or relocate railroad tracks, signal, communication, fiber optics, or other wirelines, pipelines and other facilities upon, along or across any or all parts of its property, all or any of which may be freely done at any time or times by the Licensor without liability to the Licensee or to any other party for compensation or damages. B. The foregoing grant is also subject to all outstanding superior rights (including those in favor of licensees and lessees of the Licensor's property, and others) and the right of the Licensor to renew and extend the same, and is made without covenant of title or for quiet enjoyment. Section 2. CONSTRUCTION MAINTENANCE AND OPERATION. A. The Pipeline shall be designed, constructed, operated, maintained, repaired, renewed, modified and/or reconstructed by the Licensee in strict conformity with (i) Licensor's current standards and specifications ( "UP Specifications "), except for variances approved in advance in writing by the Licensor's Assistant Vice President Engineering — Design, or his authorized representative; (ii) such other additional safety standards as the Licensor, in its sole discretion, elects to require, including, without limitation, American Railway Engineering and Maintenance -of -Way Association ( "AREMA ") standards and guidelines (collectively, "UP Additional Requirements "), and (iii) all applicable laws, rules and regulations ( "Laws "). If there is any conflict between the requirements of any Law and the UP Specifications or the UP Additional Requirements, the most restrictive will apply. B. All work performed on property of the Licensor in connection with the design, construction, maintenance, repair, renewal, modification or reconstruction of the Pipeline shall be done to the satisfaction of the Licensor. C. Prior to the commencement of any work in connection with the design, construction, maintenance, repair, renewal, modification, relocation, reconstruction or removal of the Pipeline from Licensor's property, the Licensee shall submit to the Licensor plans setting out the method and manner of handling the work, including the shoring and cribbing, if any, required to protect the Licensor's operations, and shall not proceed with the work until such plans have been approved by the Licensor's Assistant Vice President Engineering Design, or his authorized representative, and then the work shall be done to the satisfaction of the Licensor's Assistant Vice President Engineering Design or his authorized representative. The Licensor shall have the right, if it so elects, to provide such support as it may deem necessary for the safety of its track or tracks during the time of construction, maintenance, repair, renewal, modification, relocation, reconstruction or removal of the Pipeline, and, in the event the Licensor provides such support, the Licensee shall pay to the Licensor, within fifteen (15) days after bills shall have been rendered therefore, all expenses incurred by the Licensor in connection therewith, which expenses shall include all assignable costs. D. The Licensee shall keep and maintain the soil over the Pipeline thoroughly compacted and the grade even with the adjacent surface of the ground. E. In the prosecution of any work covered by this Agreement, Licensee shall secure any and all necessary permits and shall comply with all applicable federal, state and local laws, regulations and enactments affecting the work including, without limitation, all applicable Federal Railroad Administration regulations. Section 3. NOTICE OF COMMENCEMENT OF WORK / LICENSOR REPRESENTATIVE / SUPERVISION / FLAGGING / SAFETY. A. If an emergency should arise requiring immediate attention, the Licensee shall provide as much notice as practicable to Licensor before commencing any work. In all other situations, the Licensee shall notify the Licensor at least ten (10) days (or such other time as the Licensor may allow) in advance of the commencement of any work upon property of the Licensor in connection with the construction, maintenance, repair, renewal, modification, reconstruction, relocation or removal of the Pipeline. All such work shall be prosecuted diligently to completion. The Licensee will coordinate its initial, and any subsequent work with the following employee of Licensor or his or her duly authorized representative (hereinafter "Licensor Representative" or "Railroad Representative "): Robert Gutierrez - MTM Union Pacific Railroad Company 2790 D Road, RM 2790 D Road Grand Jct, CO 81501 970.248.4244 Cell 970.778.1507 Stephen Thompson - MSM Union Pacific Railroad Company 2790 D Road Grand Jct, CO 81501 970.248.4237 Cell: 970.261.0761 B. Licensee, at its own expense, shall adequately police and supervise all work to be performed. The responsibility of Licensee for safe conduct and adequate policing and supervision of work shall not be lessened or otherwise affected by Licensor's approval of plans and specifications involving the work, or by Licensor's collaboration in performance of any work, or by the presence at the work site of a Licensor Representative, or by compliance by Licensee with any requests or recommendations made by the Licensor Representative. C. At the request of Licensor, Licensee shall remove from Licensor's property any employee who fails to conform to the instructions of the Licensor Representative in connection with the work on Licensor's property. Licensee shall indemnify Licensor against any claims arising from the removal of any such employee from Licensor's property. D. Licensee shall notify the Licensor Representative at least ten (10) working days in advance of proposed performance of any work in which any person or equipment will be within twenty -five (25) feet of any track, or will be near enough to any track that any equipment extension (such as, but not limited to, a crane boom) will reach to within twenty-five (25) feet of any track. No work of any kind shall be performed, and no person, equipment, machinery, tool(s), material(s), vehicle(s), or thing(s) shall be located, operated, placed, or stored within twenty -five (25) feet of any of Licensor's track(s) at any time, for any reason, unless and until a railroad flagman is provided to watch for trains. Upon receipt of such ten (10) day notice, the Licensor Representative will determine and inform Licensor whether a flagman need be present and whether any special protective or safety measures need to be implemented. If flagging or other special protective or safety measures are performed by Licensor, Licensor will bill Licensee for such expenses incurred by Licensor, unless Licensor and a federal, state or local governmental entity have agreed that Licensor is to bill such expenses to the federal, state or local governmental entity. If Licensor will be sending the bills to Licensee, Licensee shall pay such bills within thirty (30) days of receipt of billing. If Licensor performs any flagging, or other special protective or safety measures are performed by Licensor, Licensee agrees that Licensee is not relieved of any of responsibilities or liabilities set forth in this Agreement. E. The rate of pay per hour for each flagman will be the prevailing hourly rate in effect for an eight - hour day for the class of flagmen used during regularly assigned hours and overtime in accordance with Labor Agreements and Schedules in effect at the time the work is performed. In addition to the cost of such labor, a composite charge for vacation, holiday, health and welfare, supplemental sickness, Railroad Retirement and unemployment compensation, supplemental pension, Employees Liability and Property Damage and Administration will be included, computed on actual payroll. The composite charge will be the prevailing composite charge in effect at the time the work is performed. One and one -half times the current hourly rate is paid for overtime, Saturdays and Sundays, and two and one -half times current hourly rate for holidays. Wage rates are subject to change, at any time, by law or by agreement between Licensor and its employees, and may be retroactive as a result of negotiations or a ruling of an authorized governmental agency. Additional charges on labor are also subject to change. If the wage rate or additional charges are changed, Licensee (or the governmental entity, as applicable) shall pay on the basis of the new rates and charges. E Reimbursement to Licensor will be required covering the full eight -hour day during which any flagman is furnished, unless the flagman can be assigned to other railroad work during a portion of such day, in which event reimbursement will not be required for the portion of the day during which the flagman is engaged in other railroad work. Reimbursement will also be required for any day not actually worked by the flagman following the flagman's assignment to work on the project for which Licensor is required to pay the flagman and which could not reasonably be avoided by Licensor by assignment of such flagman to other work, even though Licensee may not be working during such time. When it becomes necessary for Licensor to bulletin and assign an employee to a flagging position in compliance with union collective bargaining agreements, Licensee must provide Licensor a minimum of five (5) days notice prior to the cessation of the need for a flagman. If five (5) days notice of cessation is not given, Licensee will still be required to pay flagging charges for the five (5) day notice period required by union agreement to be given to the employee, even though flagging is not required for that period. An additional ten (10) days notice must then be given to Licensor if flagging services are needed again after such five day cessation notice has been given to Licensor. G. Safety of personnel, property, rail operations and the public is of paramount importance in the prosecution of the work performed by Licensee or its contractor. Licensee shall be responsible for initiating, maintaining and supervising all safety, operations and programs in connection with the work. Licensee and its contractor shall at a minimum comply with Licensor's safety standards listed in Exhibit D, hereto attached, to ensure uniformity with the safety standards followed by Licensor's own forces. As a part of Licensee's safety responsibilities, Licensee shall notify Licensor if it determines that any of Licensor's safety standards are contrary to good safety practices. Licensee and its contractor shall furnish copies of Exhibit D to each of its employees before they enter the job site. H. Without limitation of the provisions of paragraph G above, Licensee shall keep the job site free from safety and health hazards and ensure that their employees are competent and adequately trained in all safety and health aspects of the job. Licensee shall have proper first aid supplies available on the job site so that prompt first aid services may be provided to any person injured on the job site. Prompt notification shall be given to Licensor of any U.S. Occupational Safety and Health Administration reportable injuries. Licensee shall have a non - delegable duty to control its employees while they are on the job site or any other property of Licensor, and to be certain they do not use, be under the influence of, or have in their possession any alcoholic beverage, drug or other substance that may inhibit the safe performance of any work. J. If and when requested by Licensor, Licensee shall deliver to Licensor a copy of its safety plan for conducting the work (the "Safety Plan "). Licensor shall have the right, but not the obligation, to require Licensee to correct any deficiencies in the Safety Plan. The terms of this Agreement shall control if there are any inconsistencies between this Agreement and the Safety Plan. Section 4. LICENSEE TO BEAR ENTIRE EXPENSE. The Licensee shall bear the entire cost and expense incurred in connection with the design, construction, maintenance, repair and renewal and any and all modification, revision, relocation, removal or reconstruction of the Pipeline, including any and all expense which may be incurred by the Licensor in connection therewith for supervision, inspection, flagging, or otherwise. Section 5. REINFORCEMENT RELOCATION OR REMOVAL OF PIPELINE. A. The license herein granted is subject to the needs and requirements of the Licensor in the safe and efficient operation of its railroad and in the improvement and use of its property. The Licensee shall, at the sole expense of the Licensee, reinforce or otherwise modify the Pipeline, or move all or any portion of the Pipeline to such new location, or remove the Pipeline from the Licensor's property, as the Licensor may designate, whenever, in the furtherance of its needs and requirements, the Licensor, at its sole election, finds such action necessary or desirable. B. All the terms, conditions and stipulations herein expressed with reference to the Pipeline on property of the Licensor in the location hereinbefore described shall, so far as the Pipeline remains on the property, apply to the Pipeline as modified, changed or relocated within the contemplation of this section. Section 6. NO INTERFERENCE WITH LICENSOR'S OPERATION. A. The Pipeline and all parts thereof within and outside of the limits of the property of the Licensor shall be designed, constructed and, at all times, maintained, repaired, renewed and operated in such manner as to cause no interference whatsoever with the constant, continuous and uninterrupted use of the tracks, property and facilities of the Licensor and nothing shall be done or suffered to be done by the Licensee at any time that would in any manner impair the safety thereof. B. Explosives or other highly flammable substances shall not be stored on Licensor's property without the prior written approval of Licensor. C. No additional vehicular crossings (including temporary haul roads) or pedestrian crossings over Licensor's trackage shall be installed or used by Licensor or its contractors without the prior written permission of Licensor. D. When not in use, any machinery and materials of Licensor or its contractors shall be kept at least fifty (50) feet from the centerline of Licensor's nearest track. E. Operations of Licensor and work performed by Licensor's personnel may cause delays in the work to be performed by Licensee. Licensee accepts this risk and agrees that Licensor shall have no liability to Licensee or any other person or entity for any such delays. Licensee shall coordinate its activities with those of Licensor and third parties so as to avoid interference with railroad operations. The safe operation of Licensor's train movements and other activities by Licensor take precedence over any work to be performed by Licensee. Section 7. PROTECTION OF FIBER OPTIC CABLE SYSTEMS. A. Fiber optic cable systems may be buried on the Licensor's property. Protection of the fiber optic cable systems is of extreme importance since any break could disrupt service to users resulting in business interruption and loss of revenue and profits. Licensee shall telephone the Licensor during normal business hours (7:00 a.m. to 9:00 p.m. Central Time, Monday through Friday, except for holidays) at 1 -800- 336 -9193 (also a 24 -hour, 7 -day number for emergency calls) to determine if fiber optic cable is buried anywhere on the Licensor's premises to be used by the Licensee. If it is, Licensee will telephone the telecommunications company(ies) involved, arrange for a cable locator, make arrangements for relocation or other protection of the fiber optic cable, all at Licensee's expense, and will commence no work on the Licensor's property until all such protection or relocation has been accomplished. Licensee shall indemnify and hold the Licensor harmless from and against all costs, liability and expense whatsoever (including, without limitation, attorneys' fees, court costs and expenses) arising out of or caused in any way by Licensee's failure to comply with the provisions of this paragraph. B. IN ADDITION TO OTHER INDEMNITY PROVISIONS IN THIS AGREEMENT, THE LICENSEE SHALL, AND SHALL CAUSE ITS CONTRACTOR TO, RELEASE, INDEMNIFY, DEFEND AND HOLD THE LICENSOR HARMLESS FROM AND AGAINST ALL COSTS, LIABILITY AND EXPENSE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ATTORNEYS' FEES, COURT COSTS AND EXPENSES) CAUSED BY THE NEGLIGENCE OF THE LICENSEE, ITS CONTRACTOR, AGENTS AND /OR EMPLOYEES, RESULTING IN (1) ANY DAMAGE TO OR DESTRUCTION OF ANY TELECOMMUiNICATIONS SYSTEM ON LICENSOR'S PROPERTY, AND /OR (2) ANY INJURY TO OR DEATH OF ANY PERSON EMPLOYED BY OR ON BEHALF OF ANY TELECOMMUNICATIONS COMPANY, AND /OR ITS CONTRACTOR, AGENTS AND /OR EMPLOYEES, ON LICENSOR'S PROPERTY, EXCEPT IF SUCH COSTS, LIABILITY OR EXPENSES ARE CAUSED SOLELY BY THE DIRECT ACTIVE NEGLIGENCE OF THE LICENSOR. LICENSEE FURTHER AGREES THAT IT SHALL NOT HAVE OR SEEK RECOURSE AGAINST LICENSOR FOR ANY CLAIM OR CAUSE OF ACTION FOR ALLEGED LOSS OF PROFITS OR REVENUE OR LOSS OF SERVICE OR OTHER CONSEQUENTIAL DAMAGE TO A TELECOMMUNICATION COMPANY USING LICENSOR'S PROPERTY OR A CUSTOMER OR USER OF SERVICES OF THE FIBER OPTIC CABLE ON LICENSOR'S PROPERTY. Section 8. CLAIMS AND LIENS FOR LABOR AND MATE L; TAXES. A. The Licensee shall fully pay for all materials joined or affixed to and labor performed upon property of the Licensor in connection with the construction, maintenance, repair, renewal, modification or reconstruction of the Pipeline, and shall not permit or suffer any mechanic's or materialman's lien of any kind or nature to be enforced against the property for any work done or materials furnished thereon at the instance or request or on behalf of the Licensee. The Licensee shall indemnify and hold harmless the Licensor against and from any acrid all liens, claims, demands, costs and expenses of whatsoever nature in any way connected with or growing out of such work done, labor performed, or materials furnished. B. The Licensee shall promptly pay or discharge all taxes, charges and assessments levied upon, in respect to, or on account of the Pipeline, to prevent the same from becoming a charge or lien upon property of the Licensor, and so that the taxes, charges and assessments levied upon or in respect to such property shall not be increased because of the location, construction or maintenance of the Pipeline or any improvement, appliance or fixture connected therewith placed upon such property, or on account of the Licensee's interest therein. Where such tax, charge or assessment may not be separately made or assessed to the Licensee but shall be included in the assessment of the property of the Licensor, then the Licensee shall pay to the Licensor an equitable proportion of such taxes determined by the value of the Licensee's property upon property of the Licensor as compared with the entire value of such property. Section 9. RESTORATION OF LICENSOR'S PROPERTY. In the event the Licensee in any manner moves or disturbs any of the property of the Licensor in connection with the construction, maintenance, repair, renewal, modification, reconstruction, relocation or removal of the Pipeline, then in that event the Licensee shall, as soon as possible and at Licensee's sole expense, restore such property to the same condition as the same were before such property was moved or disturbed, and the Licensee shall indemnify and hold harmless the Licensor, its officers, agents and employees, against and from any and all liability, loss, damages, claims, demands, costs and expenses of whatsoever nature, including court costs and attorneys' fees, which may result from injury to or death of persons whomsoever, or damage to or loss or destruction of property whatsoever, when such injury, death, damage, loss or destruction grows out of or arises from the moving or disturbance of any other property of the Licensor. Section 10. INDEMNITY. A. As used in this Section, "Licensor" includes other railroad companies using the Licensoe's property at or near the location of the Licensee's installation and their officers agents, and employees; "Loss" includes loss, damage, claims, demands, actions, causes of action, penalties, costs, and expenses of whatsoever nature, including court costs and attorneys' fees, which may result from: (a) injury to or death of persons whomsoever (including the Licensor's officers, agents, and employees, the Licensee's officers, agents, and employees, as well as any other person); and/or (b) damage to or loss or destruction of property whatsoever (including Licensee's property, damage to the roadbed, tracks, equipment, or other property of the Licensor, or property in its care or custody). B. AS A MAJOR INDUCEMENT AND IN CONSIDERATION OF THE LICENSE AND PERMISSION HEREIN GRANTED, TO THE FULLEST EXTENT PERMITTED BY LAW, THE LICENSEE SHALL, AND SHALL CAUSE ITS CONTRACTOR TO, RELEASE, INDEMNIFY, DEFEND AND HOLD HARMLESS THE LICENSOR FROM ANY LOSS WHICH IS DUE TO OR ARISES FROM: I. THE PROSECUTION OF ANY WORK CONTEMPLATED BY THIS AGREEMENT INCLUDING THE INSTALLATION, CONSTRUCTION, MAINTENANCE, REPAIR, RENEWAL, MODIFICATION, RECONSTRUCTION, RELOCATION, OR REMOVAL OF THE PIPELINE OR ANY PART THEREOF; 2. ANY RIGHTS OR INTERESTS GRANTED PURSUANT TO THIS LICENSE; 3. THE PRESENCE, OPERATION, OR USE OF THE PIPELINE OR CONTENTS ESCAPING THEREFROM; 4. THE ENVIRONMENTAL STATUS OF THE PROPERTY CAUSED BY OR CONTRIBUTED TO BY LICENSEE; S. ANY ACT OR OMISSION OF LICENSEE OR LICENSEE'S OFFICERS, AGENTS, INVITEES, EMPLOYEES, OR CONTRACTORS OR ANYONE DIRECTLY OR INDIRECTLY EMPLOYED BY ANY OF THEM, OR ANYONE THEY CONTROL OR EXERCISE CONTROL OVER; OR G. LICENSEE'S BREACH OF THIS AGREEMENT, EXCEPT WHERE THE LOSS IS CAUSED BY THE SOLE DIRECT AND ACTIVE NEGLIGENCE OF THE LICENSOR, AS DETERMINED IN A FINAL JUDGMENT BY A COURT OF COMPETENT JURISDICTION, IT BEING THE INTENTION OF THE PARTIES THAT THE ABOVE INDEMNITY WILL OTHERWISE APPLY TO LOSSES CAUSED BY OR ARISING FROM, IN WHOLE OR IN PART, LICENSOR'S NEGLIGENCE. C. Upon written notice from Licensor, Licensee agrees to assume the defense of any lawsuit of proceeding brought against any indemnitee by any entity, relating to any matter covered by this License for which Licensee has an obligation to assume liability for and/or save and hold harmless any indemnitee. Licensee shall pay all costs incident to such defense, including, but not limited to, reasonable attorney's fees, investigators' fees, litigation and appeal expenses, settlement payments and amounts paid in satisfaction of judgments. Section 1 1. REMOVAL OF PIPELINE UPON TERMINATION OF AGREEMENT. Prior to the termination of this Agreement howsoever, the Licensee shall, at Licensee's sole expense, remove the Pipeline from those portions of the property not occupied by the roadbed and track or tracks of the Licensor and shall restore, to the satisfaction of the Licensor, such portions of such property to as good a condition as they were in at the time of the construction of the Pipeline. If the Licensee fails to do the foregoing, the Licensor may, but is not obligated, to perform such work of removal and restoration at the cost and expense of the Licensee. In the event of the removal by the Licensor of the property of the Licensee and of the restoration of the roadbed and property as herein provided, the Licensor shall in no manner be liable to the Licensee for any damage sustained by the Licensee for or on account thereof, and such removal and restoration shall in no manner prejudice or impair any right of action for damages, or otherwise, that the Licensor may have against the Licensee. Section 12. WAIVER OF BREACH The waiver by the Licensor of the breach of any condition, covenant or agreement herein contained to be kept, observed and performed by the Licensee shall in no way impair the right of the Licensor to avail itself of any remedy for any subsequent breach thereof. Section 13. TERMINATION. A. If the Licensee does not use the right herein granted or the Pipeline for one (1) year, or if the Licensee continues in default in the performance of any covenant or agreement herein contained for a period of thirty (30) days after written notice from the Licensor to the Licensee specifying such default, the Licensor may, at its option, forthwith immediately terminate this Agreement by written notice. B. In addition to the provisions of subparagraph (a) above, this Agreement may be terminated by written notice given by either party hereto to the other on any date in such notice stated, not less, however, than thirty (30) days subsequent to the date upon which such notice shall be given. C. Notice of default and notice of termination may be served personally upon the Licensee or by mailing to the last known address of the Licensee. Termination of this Agreement for any reason shall not affect any of the rights or obligations of the parties hereto which may have accrued, or liabilities, accrued or otherwise, which may have arisen prior thereto. Section 14. AGREEMENT NOT TO BE ASSIGNED. The Licensee shall not assign this Agreement, in whole or in part, or any rights herein granted, without the written consent of the Licensor, and it is agreed that any transfer or assignment or attempted transfer or assignment of this Agreement or any of the rights herein granted, whether voluntary, by operation of law, or otherwise, without such consent in writing, shall be absolutely void and, at the option of the Licensor, shall terminate this Agreement. Section 15. SUCCESSORS AND ASSIGNS. Subject to the provisions of Section 14 hereof, this Agreement shall be binding upon and inure to the benefit of the parties hereto, their heirs, executors, administrators, successors and assigns. Section lb. SEVERABILITY. Any provision of this Agreement which is determined by a court of competent jurisdiction to be invalid or unenforceable shall be invalid or unenforceable only to the extent of such determination, which shall not invalidate or otherwise render ineffective any other provision of this Agreement. Pipeline Crossing 07/20/08 Form Approved, AVP -law EXHIBIT C Union Pacific Railroad Company Insurance Exhibit P,. AA T 1: GENERAL INSTRUCTIONS AND REQUIREMENTS Prior to execution of this License, Licensee shall furnish Railroad with a certificate(s) of insurance, executed by a duly authorized representative of each insurer, showing compliance with all insurance required by this License. All certificates of insurance and correspondence shall be addressed and sent to: Union Pacific Railroad Company Real Estate Department — Folder No.: 02584 -73 1400 Douglas St., STOP 1690 Omaha, NE 68179 -1690 All insurance policies must be written by a reputable insurance company acceptable to Railroad or with a current Best's insurance Guide Rating of A- and Class VII or better, and authorized to do business in the state(s) in which the work is to be performed. All policies required by this License shall provide coverage for punitive damages unless (a) insurance coverage may not lawfully be obtained for any punitive damages that may arise under this License, or (d) all punitive damages are prohibited by all states in which this License will be performed. The fact that insurance is obtained by Licensee will not be deemed to release or diminish the liability of Licensee, including, without limitation, liability under the indemnity provisions of this License. Damages recoverable by Railroad from Licensee or any third party will not be limited by the amount of the required insurance coverage. PART 2: SPECIFIC INSURANCE LIMITS AND REQUIREMENTS Licensee shall, at its sole cost and expense, procure and maintain during the life of this License (except as otherwise provided in this License) the following insurance coverage: A. Commercial General Liability Insurance written on ISO Occurrence form CG 00 01 12 04 (or a substitute form providing equivalent coverage) with limits of not less than: • $2,000,000 Each Occurrence • $4,000,000 Aggregate This policy must also contain the following endorsements (which must be stated on the certificate of insurance): • Additional Insured Endorsement ISO Form CG 20 26 (or a substitute form providing equivalent coverage). The coverage provided to Railroad as additional insured shall, to the extent provided under ISO Additional Insured Endorsement Form CG 20 26, provide coverage for Railroad's negligence whether sole or partial, active or passive, and shall not be limited by Licensee's liability under the indemnity provisions of this License. • Contractual Liability - Railroads ISO Form 24 17 10 01 (or a substitute form providing equivalent coverage) showing "Union Pacific Railroad Company Property" covered by this License as the "Designated Job Site ". B. Business Automobile Liability Insurance written on ISO Form CA 00 01 10 01 (or a substitute form providing equivalent coverage) with a limit of: • $2,000,000 each accident. This policy must contain the following endorsements (which must be stated on the Certificate of Insurance): • Designated Insured ISO Form CA 20 48 02 99 (or a substitute form providing equivalent coverage). • Coverage for Certain Operations in Connection with Railroads ISO Form CA 20 70 10 01 showing "Union Pacific Railroad Property" covered by this License as the "Designated Job Site ". • Motor Carriers Act Endorsement OMB Form MCS -90 (if required by law). C. Workers Compensation Insurance. Coverage must include but not be limited to: • Licensee's statutory liability under the workers' compensation laws of the state(s) affected by this License. Employers' Liability (Part B) with limits of at least $500,000 each accident, $500,000 disease policy limit $500,000 each employee. • If Licensee is self- insured, evidence of state approval and excess workers compensation coverage must be provided. • Licensee shall waive all rights of recovery, and its insurers also waive all rights of subrogation of damages against Railroad and its agents, officers, directors and employees for damages covered by the workers compensation and employers liability obtained by Licensee required in this License. This waiver must be stated on the certificate of insurance. D. Umbrella or excess liability Insurance. If Licensee utilizes umbrella or excess policies to meet limit requirements, these policies must "follow form" and afford no less coverage than the primary policy. If utilized, Licensee shall waive all rights of recovery, and its insurers also waive all rights of subrogation of damages against Railroad and its agents, officers, directors and employees for damages covered by Umbrella or Excess Liability obtained by Licensee required in this License. This waiver must be stated on the certificate of insurance. E. Railroad Protective Liability Insurance. At all times during construction, installation, repair or removal of a pipeline or wire line Licensee or its Contractor must obtain and maintain Railroad Protective Liability insurance written on ISO occurrence form CG 00 35 12 04 (or a substitute form providing equivalent coverage) on behalf of Railroad as named insured, with a limit of not less than $2,000,000 per occurrence and an aggregate of $6,000,000. A binder stating the policy is in place must be submitted to Railroad before the work may be commenced and until the original policy is forwarded to Railroad. Pipeline Crossing 07/20/08 Form Approved, AVP -law EXHIBIT Q SAFETY STANDARDS MMMUM SAFETY REQUIREMENTS The term "employees" as used herein refer to all employees of Licensee or its contractors, subcontractors, or agents, as well as any subcontractor or agent of any Licensee. I. Clothing A. All employees of Licensee will be suitably dressed to perform their duties safely and in a manner that will not interfere with their vision, hearing, or free use of their hands or feet. Specifically, Licensee's employees must wear: 0) Waist - length shirts with sleeves. (ii) Trousers that cover the entire leg. If flare - legged trousers are worn, the trouser bottoms must be tied to prevent catching. (iii) Footwear that covers their ankles and has a defined heel. Employees working on bridges are required to wear safety -toed footwear that conforms to the American National Standards Institute (ANSI) and FRA footwear requirements. B. Employees shall not wear boots (other than work boots), sandals, canvas-type shoes, or other shoes that have thin soles or heels that are higher than normal. C. Employees must not wear loose or ragged clothing, neckties, finger rings, or other loose jewelry while operating or working on machinery. II. Personal Protective Equipment Licensee shall require its employee to wear personal protective equipment as specified by Railroad rules, regulations, or recommended or requested by the Railroad Representative. (i) Hard hat that meets the American National Standard (ANSI) Z89.1 — latest revision. Hard hats should be affixed with Licensee's company logo or name. Eye protection that meets American National Standard (ANSI) for occupational and educational eye and face protection, 287.1 — latest revision. Additional eye protection must be provided to meet specific job situations such as welding, grinding, etc. (iii) Hearing protection, which affords enough attenuation to give protection from noise levels that will be occurring on the job site. Hearing protection, in the form of plugs or muffs, must be worn when employees are within: 100 feet of a locomotive or roadway /work equipment 15 feet of power operated tools 150 feet of jet blowers or pile drivers ' 150 feet of retarders in use (when within 10 feet, employees must wear dual ear protection — plugs and muffs) (iv) Other types of personal protective equipment, such as respirators, fall protection equipment, and face shields, must be worn as recommended or requested by the Railroad Representative. Ill. On Track Safety Licensee is responsible for compliance with the Federal Railroad Administration's Roadway Worker Protection regulations — 49CFR214, Subpart C and Railroad's On -Track Safety rules. Under 49CFR214, Subpart C, railroad contractors are responsible for the training of their employees on such regulations. In addition to the instructions contained in Roadway Worker Protection regulations, all employees must: (i) Maintain a minimum distance of at least twenty-five (25) feet to any track unless the Railroad Representative is present to authorize movements. (ii) Wear an orange, reflectorized work wear approved by the Railroad Representative. (iii) Participate in a job briefing that will specify the type of On -Track Safety for the type of work being performed. Licensee must take special note of limits of track authority, which tracks may or may not be fouled, and clearing the track. Licensee will also receive special instructions relating to the work zone around machines and minimum distances between machines while working or traveling. Iv. Equipment A. It is the responsibility of Licensee to ensure that all equipment is in a safe condition to operate. If, in the opinion of the Railroad Representative, any of Licensee's equipment is unsafe for use, Licensee shall remove such equipment from Railroad's property. In addition, Licensee must ensure that the operators of all equipment are properly trained and competent in the safe operation of the equipment. In addition, operators must be: Familiar and comply with Railroad's rules on lockout/tagout of equipment. Trained in and comply with the applicable operating rules if operating any by -rail equipment on- track. • Trained in and comply with the applicable air brake rules if operating any equipment that moves rail cars or any other rail bound equipment. B. All self - propelled equipment must be equipped with a first -aid kit, fire extinguisher, and audible back -up warning device. C- Unless otherwise authorized by the Railroad Representative, all equipment must be parked a minimum of twenty-five (25) feet from any track. Before leaving any equipment unattended, the operator must stop the engine and properly secure the equipment against movement. D. Cranes must be equipped with three orange cones that will be used to mark the working area of the crane and the minimum clearances to overhead powerlines. V. General Safety Requirements A. Licensee shall ensure that all waste is properly disposed of in accordance with applicable federal and state regulations. B. Licensee shall ensure that all employees participate in and comply with a job briefing conducted by the Railroad Representative, if applicable. During this briefing, the Railroad Representative will specify safe work procedures, (including On -Track Safety) and the potential hazards of the job. If any employee has any questions or concerns about the work, the employee must voice them during the job briefing. Additional job briefings will be conducted during the work as conditions, work procedures, or personnel change. C. All track work performed by Licensee meets the minimum safety requirements established by the Federal Railroad Administration's Track Safety Standards 49CFR213. D. All employees comply with the following safety procedures when working around any railroad track: (i) Always be on the alert for moving equipment. Employees must always expect movement on any track, at any time, in either direction. Do not step or walk on the top of the rail, frog, switches, guard rails, or other track components. In passing around the ends of standing cars, engines, roadway machines or work equipment, leave at least 20 feet between yourself and the end of the equipment. Do not go between pieces of equipment of the opening is less than one car length (50 feet). (iv) Avoid walking or standing on a track unless so authorized by the employee in charge. (v) Before stepping over or crossing tracks, look in both directions first. (vi) Do not sit on, lie under, or cross between cars except as required in the performance of your duties and only when track and equipment have been protected against movement. E. All employees must comply with all federal and state regulations concerning workplace safety.